Farnsworth-Munsell 100 Hue test online: colour discrimination
Эта статья ещё не переведена и показана на английском.
Провести этот тест с пациентом
Проводите его на приёме на любом экране, сохраняйте результат в карте пациента, печатайте или экспортируйте отчёт.
What it measures
The Farnsworth-Munsell 100 Hue test measures hue discrimination. Its caps share the same lightness and saturation and differ only in hue, in steps small enough to challenge normal colour vision. Arranging them in order shows how finely a person discriminates hue, and where on the colour circle that discrimination breaks down.
It answers two questions at once. The total error score grades overall discrimination, from superior to low. The pattern of errors shows whether a loss follows a red-green or a blue-yellow axis, or no axis at all.
How it is administered
The screen version keeps the structure of the original: 85 caps in four trays, each tray with a fixed cap at both ends. The caps of a tray start mixed. The patient drags them into order so that the colour changes smoothly from the left cap to the right cap, then moves to the next tray.
The test is done one eye at a time when an acquired defect is suspected, and with both eyes for a congenital screen. The screen is set to full brightness with night mode, blue-light filters and automatic colour adjustment turned off, in a room with even, neutral light, with the patient about 50 cm away wearing their usual correction. A tray takes about two minutes; the whole test takes 10 to 20.
Reading the result
Each cap scores the sum of its distances to its two neighbours, minus two, so a cap in its right place scores zero. The total error score (TES) is the sum over all caps, and its square root is used to compare scores and follow them over time. As a guide from Farnsworth, a TES of 0 to 16 is superior discrimination, 20 to 100 average, and above 100 low. Scores rise with age.
The polar diagram plots each cap's error outwards from a ring that stands for a perfect arrangement. Normal vision gives a small, even ring. A colour vision defect gives a bipolar pattern, errors gathered on two opposite sides, and the line through them is the confusion axis.
The axis is computed with the moment of inertia method of Vingrys and King-Smith. The confusion angle gives its direction, the C-index its severity against a perfect arrangement, and the S-index how selective, how well lined up, the errors are. Errors well above normal that line up along the protan, deutan or tritan direction are named as such. When the angle falls between protan and deutan, the result is reported as red-green. Raised errors that do not line up are reported as having no clear axis, a pattern often seen in acquired loss.
The report can be downloaded with each eye's polar diagram, scores, axis and space for notes.
When it is used
The 100 Hue is used to grade colour vision beyond pass or fail: mild congenital defects that pass the D-15, and occupations that depend on fine colour judgement. It is a standard test for acquired colour vision loss, in glaucoma, diabetic retinopathy, optic neuritis and other optic neuropathies, macular disease, and when monitoring drugs with ocular toxicity such as ethambutol and hydroxychloroquine. Testing each eye separately, and repeating over time, follows a change.
Limitations
Colours depend on the screen. Displays differ in colour accuracy, brightness and white point, and night modes and colour filters shift every cap. The caps are calculated for a standard display, so compare results taken on the same screen in the same conditions, and treat printed-test norms as a guide.
The screen caps are equally spaced in hue, so every step is equally difficult. The printed caps are not, in the blue range: protan and deutan errors fall on the same cap numbers as on the printed test, while tritan errors fall near caps 84 and 42 rather than 4 to 7 and 46 to 52. The diagram marks where each axis gathers for these caps.
The test is long and tiring, needs steady attention, and shows a learning effect on repetition. The ageing lens yellows and can produce a mild tritan-like pattern in older patients. Protan and deutan axes lie close together and are not always separated. The test does not replace an anomaloscope for classifying congenital defects, or a full examination, and is in beta: it has not been validated against the printed test.
Вопросы об этом тесте
What does the 100 Hue test measure?
Hue discrimination: how finely a person can tell apart colours that differ only in hue. It grades the whole range from superior to poor colour discrimination, and shows the axis of a defect, red-green or blue-yellow.
How is the 100 Hue test different from the D-15?
The D-15 uses 15 caps with large steps between them and separates normal or mild colour vision from a significant defect. The 100 Hue uses 85 caps with small steps, so it grades severity, picks up mild and acquired losses the D-15 misses, and gives a score that can be followed over time.
How is the 100 Hue test scored?
Each cap scores the sum of its distances to its two neighbours, minus two, so a perfect arrangement scores zero. The total error score adds them up. The errors are plotted on a polar diagram, and the direction they line up in gives the confusion axis.
Провести этот тест с пациентом
Проводите его на приёме на любом экране, сохраняйте результат в карте пациента, печатайте или экспортируйте отчёт.